The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

chevy lover · 09-01-2002, 01:33 PM

I've done this before just not on a truck. but you shouldn't have to worry about the chain if you have the weight of the truck sitting on the lower control arm. When you get the ball joints loose, slowly take the weight off the control arm. As you get close the spring should pop, but not violently.

09-01-2002, 01:33 PM	#3
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	I've done this before just not on a truck. but you shouldn't have to worry about the chain if you have the weight of the truck sitting on the lower control arm. When you get the ball joints loose, slowly take the weight off the control arm. As you get close the spring should pop, but not violently.