|
Re: WTB Transfer case support rod
Swapped the 203 out of my 79K5 years back. When installing the 205 we had to cut the rod to length and weld it up. 1980 was the only years a 205 was the standard option behind a th350 so if it ever was made by gm i'd have the local gm dealer look up an 80 K5 and see if they did make it and if its ava.
The last swap i did was my 76 K5 Chalet and i bought a new shifter from gm and to my surprise they had redisgned the pivot point and added a sleeved bushing to stop the rattle complaint and they have a new pivot bolt for the shifter that excepts a grease zerk.
Doug W.
|