Ok, received the deflector yesterday and I'm having a bit of a delema. I'm not sure if it's cuz of Veteran's day or what, but my brain just isn't working right today!
Could someone please post some pictures of their delfector from the rear of their burb and some up close pictures of the brackets?
The deflector came with the original GM instructions and it says to mount all three rear bracket bolt holes 1.6 inches from the crown or crease of the back, where the rear of the burb begins. It seems like a rather large gap between the bottom of the visor and the top of the burb, but maybe I'm miss-reading the instructions.
I'm temporarily holding it up with a gallon of antifreeze so I can move it around and I'm running a little less than 1 3/4" between the rain gutter and the visor. This gap seems a bit big. Most of the deflectors I've seen from other members pictures put the deflector almost right on top of the rain gutter.
Unfortanetly, we have a lot of burbs and blazers in the area but almost none have a deflfector and the ones that do have the plastic modern deflector.
I was just wonder if the above measurements sound about right? Or does it not really matter?
Also, does the visor ends need to be pushed into position? The visor seems to have a bit of a bow to it.
Sorry about the crappy pictures, the day was late and the burb isn't drivable at the moment. I can take some better ones in a day or so.
The ends are drupping cuz of the bow in the visor, causes the ends to push forward about 1/2".
Thanks.