The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

6600DURAMAX · 11-15-2005, 06:06 PM

In dire need of a cab and bed for project truck

Have a chance to buy a 72 Factory A/C cab, Bed good shape minor holes and a larger dent (no crease), cab needs rocker/corners and a little floor pan work, good fenders etc.

The guy wants $1000 which I think is a little steep or steeper thanI wnat to pay. So I started to think what I dont need I could sell to recoop some $$.

Just asking ballpark figures for complete longbed chasis with disk brake front, 12 bolt rear (open carrier), 350 that runs (autozone motor with 30,000) and a turbo 350 that is no good) could a guy get $500 or is that out of the question??

thanks guys

11-15-2005, 06:06 PM	#1
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	72 Chasis Price???? In dire need of a cab and bed for project truck Have a chance to buy a 72 Factory A/C cab, Bed good shape minor holes and a larger dent (no crease), cab needs rocker/corners and a little floor pan work, good fenders etc. The guy wants $1000 which I think is a little steep or steeper thanI wnat to pay. So I started to think what I dont need I could sell to recoop some $$. Just asking ballpark figures for complete longbed chasis with disk brake front, 12 bolt rear (open carrier), 350 that runs (autozone motor with 30,000) and a turbo 350 that is no good) could a guy get $500 or is that out of the question?? thanks guys __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years Last edited by 6600DURAMAX; 11-15-2005 at 06:11 PM.