The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

super72bb · 11-15-2005, 06:14 PM

I am going to re seal the power steering pump on my 1972 4x4 it has a 350. I was just wondering if there were any tips or special tools needed so I don't take the truck out of commision for more than an evening. Without looking at it, I assume that it is as simple as just removing the pump and using a puller to get the pulley off then replacing the seal.

Thanks in advance

Curt

11-15-2005, 06:14 PM	#1
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	power steer pump seal replacement I am going to re seal the power steering pump on my 1972 4x4 it has a 350. I was just wondering if there were any tips or special tools needed so I don't take the truck out of commision for more than an evening. Without looking at it, I assume that it is as simple as just removing the pump and using a puller to get the pulley off then replacing the seal. Thanks in advance Curt __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181