|
Re: ahhhh yeahhhh!
It’s a 454 bored .030 over with Keith Black Pistons, High Volume oil pump, Comp Cam valve springs, heads reworked. New Cam bearings and freeze plugs. The engine is 3/4 assembled. All I need is the valvetrain (cam and lifters, timing chain, and roller rockers ) Intake and carburetor.
And the parts to finish off are:
SME-7010 Timing Chain Set - Double Roller w/ Torrington Bearings
SUM1439250 Chromemoly Pushrods
CRN-13744-16 Crane Roller Rocker Arms
CCA-11-318 Comp Cams Magnun 286 Cam
CCA-812-16 Comp Cams Hi-Rev Lifters
EDL-7561 Edelbrock Performer RPM Air Gap Intake Manifold
HLY-0-4779C Holley 750 CFM Dual Line Double Pumper
500-69110 Hedmad Headers
EDL-4680 Edelbrock Valve Covers
Spark Plug Wires Mallory ??
PNX-D8001 Pertronix Distributor Kit
Specked out (by the racing guy who started it) to make 500hp....
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)
Wear your PPE! You can eat with false teeth but you can't see with a false eye.
1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
|