The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70rs/ss · 11-18-2005, 01:29 PM

Worst comes to worst you can send it back to Edelbrock and they will recondition it for you. As for the screws not shutting it doen, sounds like a vaccum leak? If it runs full on and lean rich does not matter it could be a leaky gasket (base plate) or a hose off of it. You may need to pull the screws all the way out and shoot carb cleaner in there to ensure it is not plugged up as well. Good luck.

11-18-2005, 01:29 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Edelbrock Quadrajunk Replacement Worst comes to worst you can send it back to Edelbrock and they will recondition it for you. As for the screws not shutting it doen, sounds like a vaccum leak? If it runs full on and lean rich does not matter it could be a leaky gasket (base plate) or a hose off of it. You may need to pull the screws all the way out and shoot carb cleaner in there to ensure it is not plugged up as well. Good luck.