View Single Post
Old 12-05-2005, 09:09 PM   #7
71chevytruckguy
Registered User
 
71chevytruckguy's Avatar
 
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
Re: front end question

when i put dics up front on my '69, i took a complete front disc brake k-member from a '72 c-10 and swapped it out. the only thing that didn't line up was the front bolts holes on both side. all i had to do to fix this was to grind the hole in the frame out a little more to make them fit. i haven't had any porblems with it.
__________________
its a work in progess.

71 c-10 lwb, in the middle of frame off restoration.

69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump.
7.807 @ 88.37mph 1.60 60FT

80 g-20 van, tow rig, cammed 305, th350, 10 bolt

88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's
71chevytruckguy is offline   Reply With Quote