|
Re: help on 4-wheel drive to 2 wheeler
The 4x4 frame doesn't kick out over where the coils should be, so if you swap the trailing arms over you may have to build a bracket that would hold the top of the coil. I was thinking about doing this, but I decided that a 4-link would be a little easier, and leave more room under the Blazer for exhaust and stuff.
If you want to keep it simple, the flip kit on the stock rear leaves would work, but if you want to go lower than that, I would get the 2wd leaves and hangers off of a GMC truck and bolt them on, then flip it, if you like.
__________________
Steven
"If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers
R.I.P. Oscar
R.I.P. Ratchet
1967 Pontiac GTO - Dad was the Original Owner
1970 Chevy 2wd SWB "Oscar's Truck"
1970 Chevy 2wd Blazer "Ratchet's Blazer"
2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar"
2017 Chevy Suburban "BDB"
2020 Chevy Blazer Premier "Foxy"
Member of Louisiana Classic Truck Club (LCTC)
Shop Build
Last edited by smbrouss70; 12-10-2005 at 01:32 AM.
|