The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Bob B.** · 12-18-2005, 02:08 AM

What is involved to convert a '67 with the linkage style power steering to the later style Saginaw type? There is something about a clearance dimple on the frame rail, and the rag joint is different? Are the 1973-up power boxes the same as 1968-72? Also, I was told that all '67 trucks use the same mechanical steering box regardless if the truck has power steering or not. Thanks!

12-18-2005, 02:08 AM	#1
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,393	'67 Power Steering What is involved to convert a '67 with the linkage style power steering to the later style Saginaw type? There is something about a clearance dimple on the frame rail, and the rag joint is different? Are the 1973-up power boxes the same as 1968-72? Also, I was told that all '67 trucks use the same mechanical steering box regardless if the truck has power steering or not. Thanks! __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.