The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Hunden26 · 09-10-2002, 02:08 PM

The number one spot on your dizzy moves around. It is where you put it.

The easiest way to find it is to put the number one piston at TDC, but even then you could be 180 out.

To do this you need to take out the number one spark plug, bump the engine around untill the piston is at the highest point. That is TDC top dead center, then wherever your rotor points is number one, If is looks wrong, like it's in the back, spin the motor oround one more time, you were on the exhaust stroke.
Hope this helps.

09-10-2002, 02:08 PM	#4
Hunden26 HEY I like SHEEP Join Date: Jan 2002 Location: Temecula CA Posts: 86	The number one spot on your dizzy moves around. It is where you put it. The easiest way to find it is to put the number one piston at TDC, but even then you could be 180 out. To do this you need to take out the number one spark plug, bump the engine around untill the piston is at the highest point. That is TDC top dead center, then wherever your rotor points is number one, If is looks wrong, like it's in the back, spin the motor oround one more time, you were on the exhaust stroke. Hope this helps. __________________ 84 6.2 Litre Silverado SWB C10 Sunny Southern CA