The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

piecesparts · 12-19-2005, 12:31 PM

You take the wiper arm off of the post (That is grooved or splined) and move it one groove up and re-install it. Simple, especially if you have a wiper arm tool. I made one out of a piece of metal and it works well. The principal of the tool is to allow you the ease of rocking the arm splined part to sguare it up with the wiper post. It will then slide off and back on with ease. Snap-on sells them also.

12-19-2005, 12:31 PM	#2
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: How do I adjust the wiper arm? You take the wiper arm off of the post (That is grooved or splined) and move it one groove up and re-install it. Simple, especially if you have a wiper arm tool. I made one out of a piece of metal and it works well. The principal of the tool is to allow you the ease of rocking the arm splined part to sguare it up with the wiper post. It will then slide off and back on with ease. Snap-on sells them also.