The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Thought I'd never get to put some paint on, but.....

cduster · 12-20-2005, 01:28 AM

I cut a little on the passenger side from the top rail. About 3/8" wide and about 3-4i" long by the #3 and #5 cylinder tubes, just for a little clearance. The hedder hit the frame, so I just gave it a little room. Fit good on the drivers side. I don't have a good pic of it, but I'll try to get one for you tomorrow when I go out there.

Dan

12-20-2005, 01:28 AM	#15
cduster Registered User Join Date: Oct 2002 Location: S.W. Michigan Posts: 403	Re: Thought I'd never get to put some paint on, but..... I cut a little on the passenger side from the top rail. About 3/8" wide and about 3-4i" long by the #3 and #5 cylinder tubes, just for a little clearance. The hedder hit the frame, so I just gave it a little room. Fit good on the drivers side. I don't have a good pic of it, but I'll try to get one for you tomorrow when I go out there. Dan __________________ Good Judgment comes from experience. Most experience comes from bad judgment.