The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Thought I'd never get to put some paint on, but.....

cduster · 12-20-2005, 02:41 PM

Here is the notch I cut. It starts 2 3/8" from the rear tower bolt hole, and measures 1/2" x 6".

There is about 4 1/2" between the exhaust port and the frame rail.

Here are the hedders I am using.

Motor mount (drivers side)

And the motor in the process of finishing. Just waiting on a cam to finish it up.

Hope these help. Sorry for the size.
Dan

12-20-2005, 02:41 PM	#20
cduster Registered User Join Date: Oct 2002 Location: S.W. Michigan Posts: 403	Re: Thought I'd never get to put some paint on, but..... Here is the notch I cut. It starts 2 3/8" from the rear tower bolt hole, and measures 1/2" x 6". There is about 4 1/2" between the exhaust port and the frame rail. Here are the hedders I am using. Motor mount (drivers side) And the motor in the process of finishing. Just waiting on a cam to finish it up. Hope these help. Sorry for the size. Dan __________________ Good Judgment comes from experience. Most experience comes from bad judgment.