The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

red71cheyenne · 01-05-2006, 04:14 PM

The bolts that hold the bed to the frame are mostly 3/8 x 16, but I would measure them to make sure. The sides and front of the bed are held on with 5/16 x 18. All of them are carriage bolts. Most any hardware store carries them, or you could get a complete set from one of the board vendors. Good luck, Jeff.

01-05-2006, 04:14 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Replacement bolts for truck bed The bolts that hold the bed to the frame are mostly 3/8 x 16, but I would measure them to make sure. The sides and front of the bed are held on with 5/16 x 18. All of them are carriage bolts. Most any hardware store carries them, or you could get a complete set from one of the board vendors. Good luck, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty