The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 01-15-2006, 08:50 PM

I don't think you're going to gain any significant performance increase unless you can find a way to blast fuel in at the exact location the intake manifold meets the head. This was done in the June edition of Hot Rod Magazine (feature name: "The Joy of Six").

It looked like to me they were using a special 1/2" thick plate bolted bolted to the head with 6 individual lines w/spray nozzles shooting into each individual cylinder.

Let me go upstairs and scan off some pictures, someone else requested the full writeup recently.

01-15-2006, 08:50 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: fuel injection ideas for inline 6 I don't think you're going to gain any significant performance increase unless you can find a way to blast fuel in at the exact location the intake manifold meets the head. This was done in the June edition of Hot Rod Magazine (feature name: "The Joy of Six"). It looked like to me they were using a special 1/2" thick plate bolted bolted to the head with 6 individual lines w/spray nozzles shooting into each individual cylinder. Let me go upstairs and scan off some pictures, someone else requested the full writeup recently. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.