The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67Fleet · 01-19-2006, 09:03 PM

I've put my in-dash tach into my original cluster and now am confused on the wiring. It's an Autometer Sport-comp and it has 5 wires. A white and black coming from the 12v lighting, and then a red, black, and green wire from the main lead. Also, I have HEI and the top of the Delco Remy dizzy it has a little block that sticks out on the driver side and it says "tach bat" on the end of the little block but I don't see where I would connect a wire. Any help would be appreciated!!

01-19-2006, 09:03 PM	#1
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	help installing tach I've put my in-dash tach into my original cluster and now am confused on the wiring. It's an Autometer Sport-comp and it has 5 wires. A white and black coming from the 12v lighting, and then a red, black, and green wire from the main lead. Also, I have HEI and the top of the Delco Remy dizzy it has a little block that sticks out on the driver side and it says "tach bat" on the end of the little block but I don't see where I would connect a wire. Any help would be appreciated!! __________________ -Bret 67 short-fleet sold!