[67Fleet]

I put Doetsch Tech shocks on mine front and rear. Also bought CPP's relocator kit that helps do away with the severe angle you start getting when these trucks are dropped down out back. Everything went together pretty easily. I like the DT shocks as they are a bit stiffer than the stockers but not too stiff. If you plan on lowering 4" or more out back you need the relocators also. The lower mounts just bolt right up. The upper mounts you need to drill out the stock mounts as they are riveted to the frame. I used an air chisel to pop the heads of the rivets off and then just tapped the rest out with a punch & hammer. Piece of cake.