The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

see ten · 02-02-2006, 05:09 PM

Here are a couple pictures of the truck for those who asked. I will try to get my buddy to bring his camera by tonight so I can get a picture of the ECE crossmember. The man who ran the tubing for me has about 30+ years of experience. He has actually stopped doing this kind of work due to health reasons. I called him to see if he could refer me to someone and he told me he had access to a shop to do jobs for his "old customers". If you didn't notice there is just one piece of tubing from the mufflers to the tips(nothing pieced together). He came off the manifolds with 2" pipe and when he got it parallel to the frame he went up to 2.25". He took his time on this job and was happy with how it turned out. It cost me all of $220 which I feel was a bargain. (These photos were made before I had the exhaust ran which is why you don't see the tips.)

02-02-2006, 05:09 PM	#21
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: New exhaust w/6" drop pics Here are a couple pictures of the truck for those who asked. I will try to get my buddy to bring his camera by tonight so I can get a picture of the ECE crossmember. The man who ran the tubing for me has about 30+ years of experience. He has actually stopped doing this kind of work due to health reasons. I called him to see if he could refer me to someone and he told me he had access to a shop to do jobs for his "old customers". If you didn't notice there is just one piece of tubing from the mufflers to the tips(nothing pieced together). He came off the manifolds with 2" pipe and when he got it parallel to the frame he went up to 2.25". He took his time on this job and was happy with how it turned out. It cost me all of $220 which I feel was a bargain. (These photos were made before I had the exhaust ran which is why you don't see the tips.)