[Tx Firefighter]

I got a good bit done.....

1) I rebuilt and detailed the under dash heater box.
2) Lubed and freed up the heater control cables.
3) Built up an automatic steering column. Member Dennis Brooks gave me a basket case steering column awhile back with some missing parts. I built a hybrid column using missing parts from a 3 speed column.
4) I did the headlight relay mod using an obscure source for the relays (I'm going to post tech seperately on this one)
5) Removed a rusty rocker and cab corner. Fit the new parts, and ran out of gas. Of course, the welding supply house is closed on Sunday, so I had to stop there.
6) Rebuilt the whole underdash and underhood wiring harnesses using new wires and fusible links.
7) Made a pattern and built a clutch hole block off plate.
8) Filled all unused holes in the firewall.
9) Installed a front sway bar using the nice ECE lowered truck mounting kit. I'm actually using 64 model control arms with 72 model ball joints. I found out, 64 arms don't have the holes for swaybar mounting. I had to drill the holes myself. That sucked doing that, underneath the truck.