The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Can ramhorns be used on a newer style block?

**uncle** · 02-06-2006, 10:52 PM

They run straight down towards the front crossmember. I had to use a smaller starter, but was able to have the exhaust run. I also had a very good exhaust man. It can be done, but I think it would be easier to put the engine in the back holes. If you're not running an hei, that shouldn't be a problem. I used a starter from a 90 chevy truck. ( I think). Sorry for the confusion.

02-06-2006, 10:52 PM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,289	Re: Can ramhorns be used on a newer style block? They run straight down towards the front crossmember. I had to use a smaller starter, but was able to have the exhaust run. I also had a very good exhaust man. It can be done, but I think it would be easier to put the engine in the back holes. If you're not running an hei, that shouldn't be a problem. I used a starter from a 90 chevy truck. ( I think). Sorry for the confusion.