View Single Post
Old 02-19-2006, 10:39 PM   #7
BobS
Senior Member
 
BobS's Avatar
 
Join Date: May 2001
Location: West Central Minnesota
Posts: 569
Re: '66 3/4ton add power brakes...

There's an original on Ebay right now with a dual master cylinder but it's missing the aluminum wedge-shaped piece that mounts between the booster bracket and the firewall. Item number 4614824645

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

Here are some shots of how it's supposed to look:

http://community.webshots.com/photo/...56812367TiQsYO

http://community.webshots.com/photo/...33760087zpUcrS

http://community.webshots.com/photo/...56812367znAXFR

Does the AutoZone kit have the mounting brackets and pushrod to connect to the brake pedal?

I'm adding power brakes to one of my trucks now, I can let you know in a few days about the firewall issues. There's no wiring stuff to worry about but I have to check to make sure that the brake/clutch pedal bracket isn't different at the firewall for the booster mounting bracket on the engine side.

Zenish,

I saw new boosters somewhere recently they were about $165 IIRC. I'll let you know when I find it back if you're interested.

Bob
__________________
V-6....only GMC Trucks have it!

62 GMC W5000 NAPCO-V6
65 GMC 2500 NAPCO Panel-V6
66 GMC 1000-V6
66 GMC 1500-V6
67 GMC K1500-SBC (originally a KM-V6)
68 GMC C1500-V6
68 GMC C1500-V6
68 GMC Suburban C2500
70 Chevy K20-SBC
71 Chevy C30 Longhorn-SBC
72 GMC Suburban C1500-BBC
72 Chevy C10-SBC
72 GMC C5500-ToroFlow Diesel
BobS is offline   Reply With Quote