The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shelby987 · 02-20-2006, 02:14 PM

here is a link to a thread I started a while ago regarding these transmissions. It also has a couple of good documents attached regarding the install of this transmission. I am currently trying to find a way to put this transmission into my 4x4......the trick part sounds like its going to be getting the right transfer case, as the 4x4 version seems to have a 32 spline output shaft.....same as the th400, so if you want to run one, you will need a transfer case from an 80's k30. (if you don't want to run a 203)
Hopefully, as soon as I find said transfer case, i can begin my install.....I will post a how to write up once its all done.

http://www.67-72chevytrucks.com/vboa...d.php?t=186746

02-20-2006, 02:14 PM	#4
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: New process tranny. here is a link to a thread I started a while ago regarding these transmissions. It also has a couple of good documents attached regarding the install of this transmission. I am currently trying to find a way to put this transmission into my 4x4......the trick part sounds like its going to be getting the right transfer case, as the 4x4 version seems to have a 32 spline output shaft.....same as the th400, so if you want to run one, you will need a transfer case from an 80's k30. (if you don't want to run a 203) Hopefully, as soon as I find said transfer case, i can begin my install.....I will post a how to write up once its all done. http://www.67-72chevytrucks.com/vboa...d.php?t=186746 __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!