The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 02-27-2006, 11:04 PM

You need to assure that the tooth count of the 292 flywheel was the same as your new 350 flywheel is, either 153 or 168.

Coincidentally, I just swapped this same swap, twice, in the last two weeks in my own truck, 292 to 350, then back to 292. Same bellhousing for all of them.

I then took the 4 speed out and went automatic trans. It was a busy week.

02-27-2006, 11:04 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Help!! Difference in 4 speed Bells You need to assure that the tooth count of the 292 flywheel was the same as your new 350 flywheel is, either 153 or 168. Coincidentally, I just swapped this same swap, twice, in the last two weeks in my own truck, 292 to 350, then back to 292. Same bellhousing for all of them. I then took the 4 speed out and went automatic trans. It was a busy week. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 02-27-2006 at 11:04 PM.