Re: Pics of Blazers with 33's and no lift.
Here's a 4" with 33"s. It's a Tuff Country 4" all spring in the rear. The fronts are custom Alcan 9-leaf packs that were spec'd and measured out to a 3 1/2" lift in the front. The look is a bit deceiving because the tires are metric 33"s on 16"x8" rims with 4" backspace and the rear is the same width as the front.
This will give you an idea of how high the truck will sit:
If you measure in the front from the top of the axle to the bottom of the bump stop mount, then a stock spring measures about 8"... A 4" lift measures about 12", and generally speaking a 6" lift measures about 14". Add in a correction for taller tires and that will give you a pretty good idea.
I'm 6' tall and with my 4" lift I can pretty much stand on my tip-toe and slide right into the seat. The wife struggles a bit to get in, not bad, but she digs the ride height the way it is.
__________________
71 Blazer / GMPP ZZ383 / MPFI / 700R4 / 4-Wheel Disk / Ground-up frame off almost completed resto-mod
|