Re: 77 Cheyenne meets Ramjet 350 by N2TRUX
The passenger side will take a little extra work. If you look at the pics of the template, then compare them to the one above you will notice that we decided to make the cover come up higher on the plenum. I wanted to eliminate as much of the tall skinny look of the plenum as possible.
This worked great on the driver side, but caused problems on the passenger side cover. If we made it the same, the throttle cable would not be able to operate properly. Roger solved the problem by cutting a notch for the throttle cable so it had a clear path to the throttle body linkage.
|