The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Ron 586** · 03-01-2006, 11:48 PM

Do you know if the intake was off or changed out. Start engine and spray carb. cleaner around the intake/head area. Also around the vacuum ports in intake plugged off or otherwise. Be careful not to let the mist get up around carb. inlet or you won't be able to tell if you have a problem or not. If you gain rpms (while spraying) you have a vacuum leak. From the sounds of things you have been fighting it for a while. When you find it it will be something simple, just overlooked. Good luck.

03-01-2006, 11:48 PM	#16
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: miss in engine Do you know if the intake was off or changed out. Start engine and spray carb. cleaner around the intake/head area. Also around the vacuum ports in intake plugged off or otherwise. Be careful not to let the mist get up around carb. inlet or you won't be able to tell if you have a problem or not. If you gain rpms (while spraying) you have a vacuum leak. From the sounds of things you have been fighting it for a while. When you find it it will be something simple, just overlooked. Good luck. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket Last edited by Ron 586; 03-01-2006 at 11:50 PM.