The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

qksilver · 03-03-2006, 12:52 PM

it depends...........is there a way to check part numbers? I remember that used to be the hot lick. I have them for a little while back in the 80's but they rode to rough and the suspension was way to stiff.
I also went to single, much happier. If you have all four shocks, bolt a set on, try it out, then bolt the other set on.
They are probably the same shocks, some were fancy with 2 different types.

03-03-2006, 12:52 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Dual shocks it depends...........is there a way to check part numbers? I remember that used to be the hot lick. I have them for a little while back in the 80's but they rode to rough and the suspension was way to stiff. I also went to single, much happier. If you have all four shocks, bolt a set on, try it out, then bolt the other set on. They are probably the same shocks, some were fancy with 2 different types.