The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pound41 · 03-13-2006, 07:59 AM

If they are working great then I wouldn't wory about it. Ian I took a closer look and I think its not based on my see how low down and straight towards the front the prop valve is all the 71/72 I have seen the valve sits higher up and more toward the fender because the mounting brackets of the 2 are different. Also look at the flat top on the prop valve. the 71/72 is similar in shape but it is rounded on its edges like a gun barrel.Also the 2 bowls on the MC look to be one small and 1 large. On mine they are = Again not a big deal if the brakes are good them leave it. Mine weren't and thats when I started looking.

03-13-2006, 07:59 AM	#11
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Jimmy question If they are working great then I wouldn't wory about it. Ian I took a closer look and I think its not based on my see how low down and straight towards the front the prop valve is all the 71/72 I have seen the valve sits higher up and more toward the fender because the mounting brackets of the 2 are different. Also look at the flat top on the prop valve. the 71/72 is similar in shape but it is rounded on its edges like a gun barrel.Also the 2 bowls on the MC look to be one small and 1 large. On mine they are = Again not a big deal if the brakes are good them leave it. Mine weren't and thats when I started looking.