The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

matthufham · 03-19-2006, 08:48 PM

the problem was i put the spring in the plunger instead of plunger on top of spring. there fore the plunger touched the hub. i think another problem would be not snapping the cap on the cardboard right. well i guess i should of started by saying i fixed it and blasted the horn a couple times. thanks guys, now my steering column's done except for the play in the old shifter, but that problem's on the firewall where a wire holds it in park while i use a floor shift.

03-19-2006, 08:48 PM	#9
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: grant steering wheel questions the problem was i put the spring in the plunger instead of plunger on top of spring. there fore the plunger touched the hub. i think another problem would be not snapping the cap on the cardboard right. well i guess i should of started by saying i fixed it and blasted the horn a couple times. thanks guys, now my steering column's done except for the play in the old shifter, but that problem's on the firewall where a wire holds it in park while i use a floor shift.