The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 03-28-2006, 06:32 PM

Yes it always a good idea to brace things up before you start cutting out parts. But keep in mind if the rocker boxes and cab mounts are in good shape you should be able to remove the top and rockers with out any movment. But like I said to start with it is always a good idea to brace since you can not always see how good or bad things are untill you get insode them.

Kevin
LFD Inc.

03-28-2006, 06:32 PM	#5
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Floor pan/Rocker replacement Yes it always a good idea to brace things up before you start cutting out parts. But keep in mind if the rocker boxes and cab mounts are in good shape you should be able to remove the top and rockers with out any movment. But like I said to start with it is always a good idea to brace since you can not always see how good or bad things are untill you get insode them. Kevin LFD Inc.