The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 04-03-2006, 08:21 AM

If you do not care about the rust comming back and getting worse than just replace the supports and drive it. If you want it fixed right (even not for show) then replace the bad areas and start with good metal. Just my thoughts.

Kevin
LFD Inc.

04-03-2006, 08:21 AM	#3
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: cab corners and rockers If you do not care about the rust comming back and getting worse than just replace the supports and drive it. If you want it fixed right (even not for show) then replace the bad areas and start with good metal. Just my thoughts. Kevin LFD Inc.