The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Anyone have sway bars on their '67-72 4x4?

BLAZERMAN · 10-02-2002, 12:20 AM

I used one off an 84 truck on my blazer, just get the bar and spring plates off any 4x4 mid 70s to late 80s truck or blazer, the bushings can be bought anywhere, I got the upper bushing mounts off the same truck but LMC now sell these new in there 73-87 catalog and are cheap enough it's not worth messing with old ones. The 1-1/2" tube spacer would only be necessary if you have a 4" lift, I made these because I have a 2-1/2 lift and think I could do without them.

Spring plate [drivers side]

10-02-2002, 12:20 AM	#3
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	I used one off an 84 truck on my blazer, just get the bar and spring plates off any 4x4 mid 70s to late 80s truck or blazer, the bushings can be bought anywhere, I got the upper bushing mounts off the same truck but LMC now sell these new in there 73-87 catalog and are cheap enough it's not worth messing with old ones. The 1-1/2" tube spacer would only be necessary if you have a 4" lift, I made these because I have a 2-1/2 lift and think I could do without them. Spring plate [drivers side] Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 10-02-2002 at 12:56 AM.