[Dropt72Shortbed]

ive just completed buying my whole system.

bags
air lift gen 2, 2b7s for front and 2b6ext for rear -- $250 shipped (airlift had buy 3 get 4 deal last week, so really $320 shipped)
brackets
front alter images brackets -- $80 shipped
rear brackets -- no need on trailing arm rears
tank and valves
8(for 4 way FBSS control) x 10mm 3/8" smcs -- $175 used from my friend(around $280 new)
air lift 5 gallon 8x1/2" ported tank -- $75 shipped.
compressor
1 x VIAIR450 100% duty - $230
line fittings etc
75ft of 1/2" line -- $60
all fittings + hardware (not cheapo hardware store stuff) and 150psi pressure switch -- $200.
2 x dual needle guages with line -- $85
Total -- $1150 for w/ buyin specials and valves used. woulda been $1330 without deals.

you can put a kit together for less, smaller valves, only 4 valves for a crappy 2 way sistem, no guages, crappy small slow 25% duty compressor, only 3/8" line and 1/4" valves. you could probably save $325 going this route but for $325 why skimp?

only last thing i need is a switch box or rocker switches, not very expensive like $25-30 and about 3 months of my time to install this (dont get to work much while in college) things i did not include that you will need (i left these out cause some people already have these, i had a few already.)

c-notch -- bolt in $130?
2.5" drop spindles -- $230+/-
adjustable tracking arm -- $?? i dunno already got one on my truck
2" blocks -- $30
new shorter shocks -- $100-150
2x 12 packs of your choice beer -- $varies