[pjmoreland]

1) Remove the bumper.

2) Remove the cowl.

3) Remove the three bolts that attach the hood hinge to the fender and let the hood hinge sit on the inner fender.

4) Disconnect power from the battery, and remove the terminal and ground wire from the inside of the fender. Remove the battery.

5) Remove the four bolts that attach the grille to the inside of the fender (two upper and two lower). A long socket extension comes in handy.

6) Remove the two bolts that attach the radiator support to the front of the fender (screw in from the back of the radiator support).

7) Remove the two screws that attach the radiator support gusset (triangular piece) to the inside of the fender.

8) Remove all the bolts that attach the inner fender to the outer fender. There are a bunch along the edge, two a few inches in from the edge up at the top, and one way down at the bottom in the back facing down.

9) Remove the bolt that attaches the bottom rear of the fender to the cab. It threads in from behind the fender.

10) Remove the two bolts that attach the top rear of the fender to the cab in the cowl area.