The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BobbyK · 05-22-2006, 10:31 PM

I'll just be useing two 2x8's stacked on each other.
There is a channel on each side that the wood will slide into.

I was going to make a steel,hinged gate but it would have added that much more of $ to the project and it's ALOT more complicated than just useing wood.

05-22-2006, 10:31 PM	#7
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Made a trailer for the Blazer(PIC'S) I'll just be useing two 2x8's stacked on each other. There is a channel on each side that the wood will slide into. I was going to make a steel,hinged gate but it would have added that much more of $ to the project and it's ALOT more complicated than just useing wood. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 05-22-2006 at 10:32 PM.