The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

71jimmy · 06-01-2006, 04:04 PM

OK, I'm not buying or selling. This is free advice!!!!!!!!!!!!!!!!!!

All of the bolts for the hard top (double wall, not sure if there is a difference for single wall) are 5/16". The bolts for the bed rails I'm using are 1" long, and the 2 center windshield frame bolts are 1" long. The bolts that go through the visor hangers are 2.5" long. The bolts should be tappered on the end, so that they can locate themselves into the nuts.

06-01-2006, 04:04 PM	#2
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Re: what kind/size bolts OK, I'm not buying or selling. This is free advice!!!!!!!!!!!!!!!!!! All of the bolts for the hard top (double wall, not sure if there is a difference for single wall) are 5/16". The bolts for the bed rails I'm using are 1" long, and the 2 center windshield frame bolts are 1" long. The bolts that go through the visor hangers are 2.5" long. The bolts should be tappered on the end, so that they can locate themselves into the nuts. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."