The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

GMCMAX · 06-05-2006, 11:39 PM

If the tit that the ball goes on is not eaten up, the CV kit from NAPA has the yoke/ball combo in it, at least the newer trucks I've worked on have. The machine shops here can cut off and replace bad ends.

06-05-2006, 11:39 PM	#4
GMCMAX Active Member Join Date: Jan 2006 Location: Lower Mid-East Ca. Posts: 326	Re: Front Drive Shaft If the tit that the ball goes on is not eaten up, the CV kit from NAPA has the yoke/ball combo in it, at least the newer trucks I've worked on have. The machine shops here can cut off and replace bad ends. __________________ Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".