The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bagged74 · 06-06-2006, 12:39 AM

Soon after i got to this point I decided to tear it down to fix the rockers and patch a couple of places in the floor. Well this got a little out of hand and the body is now on the rotisserie. I have sandblasted the whole underside of the tub. I also sandblasted the windshield frame and dash for good measure. I put some epoxy primer on it today. I will get some pics of this up soon.

06-06-2006, 12:39 AM	#5
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: 72 2wd blazer build Soon after i got to this point I decided to tear it down to fix the rockers and patch a couple of places in the floor. Well this got a little out of hand and the body is now on the rotisserie. I have sandblasted the whole underside of the tub. I also sandblasted the windshield frame and dash for good measure. I put some epoxy primer on it today. I will get some pics of this up soon. Attached Images Last edited by bagged74; 06-06-2006 at 10:03 PM.