The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Voodooracer · 06-07-2006, 10:06 PM

Bought a 67 Step and it is lowered, don't know how far but I am ASSuming around 5-6 in the rear. My question is what does the pinion angle need to be now. Also my stock crossmember has grooved my driveshaft. Do I need to purchase the drop crossmember or change the pinion angle. All opinions are appreciated. Also the headers are the right part # but they are touching the A arm pivot point. Any suggestions? Thanx.

06-07-2006, 10:06 PM	#1
Voodooracer Registered User Join Date: Feb 2006 Location: Houston, Texas Posts: 32	Needing some crossmember advice Bought a 67 Step and it is lowered, don't know how far but I am ASSuming around 5-6 in the rear. My question is what does the pinion angle need to be now. Also my stock crossmember has grooved my driveshaft. Do I need to purchase the drop crossmember or change the pinion angle. All opinions are appreciated. Also the headers are the right part # but they are touching the A arm pivot point. Any suggestions? Thanx.