The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JameslovesJammie · 06-26-2006, 11:24 AM

OK,

I jacked the rearend of my truck up to check to see if I have a posi or not. I am on the passenger side, so that's the wheel I turn. The other wheel doesn't turn at all.

So I jack the rear end up a little more, incase the other was stuck to the dirt. I have it up about an inch off the ground and try again. Same thing.

I go to the driver's side and turn that wheel. The passenger side turns the opposite direction. I go back to the passenger side and turn it again...nothing.

Is my rearend screwed up? I thought you were supposed to be able to turn either wheel and the opposite would turn.

Thanks guys!

James

06-26-2006, 11:24 AM	#1
JameslovesJammie God Bless Mr. T Join Date: Apr 2004 Location: Minot, ND Posts: 348	What does it mean when... OK, I jacked the rearend of my truck up to check to see if I have a posi or not. I am on the passenger side, so that's the wheel I turn. The other wheel doesn't turn at all. So I jack the rear end up a little more, incase the other was stuck to the dirt. I have it up about an inch off the ground and try again. Same thing. I go to the driver's side and turn that wheel. The passenger side turns the opposite direction. I go back to the passenger side and turn it again...nothing. Is my rearend screwed up? I thought you were supposed to be able to turn either wheel and the opposite would turn. Thanks guys! James __________________ Like a midget at a urinal...sometimes you must stay on your toes.