The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

crazy longhorn · 10-12-2002, 03:32 PM

I use a die grinder with a whiz wheel, & cut a cross on the rivet head. then just knock it off with a chisel. If you dont plan to save the old stick crossmember, it may be easier to to hack it out with a sawzall . good luck......crazy AL

10-12-2002, 03:32 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	I use a die grinder with a whiz wheel, & cut a cross on the rivet head. then just knock it off with a chisel. If you dont plan to save the old stick crossmember, it may be easier to to hack it out with a sawzall . good luck......crazy AL