The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

nate68 · 10-12-2002, 07:26 PM

i'm running stock converter with my xe268 but its in a 400 and its a 700r4 which i believe he stall is higher. i ran a 2000 stall with it in my th400 and it was too much stall for that motor.
i ran a 268h with a stock converter in my 350 and it could have used just a little bit looser stall like a 1900 or so, that motor's compression was a little low also.
u might want to try like the xe below the xe268 i think its a xe262. crane has a ton of grind's for good low end torque motors.

10-12-2002, 07:26 PM	#10
nate68 Registered User Join Date: Jan 2000 Location: ca Posts: 1,110	i'm running stock converter with my xe268 but its in a 400 and its a 700r4 which i believe he stall is higher. i ran a 2000 stall with it in my th400 and it was too much stall for that motor. i ran a 268h with a stock converter in my 350 and it could have used just a little bit looser stall like a 1900 or so, that motor's compression was a little low also. u might want to try like the xe below the xe268 i think its a xe262. crane has a ton of grind's for good low end torque motors. __________________ 68 short step, 406/700r4, 9" w/discs.