The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jeffs65GMC · 07-08-2006, 04:54 PM

Can't speak from much experience, but on my fairly rust free 65, it had a bit of rust on the rear of the top of the cab (where it angles back out), one rocker, and one cab corner. Cab corners and rockers are gonna be an issue in any truck, along with door bottoms, fenders, etc. Anything can be fixed with some sheetmetal and a welder, so don't be scared away if it's mostly solid.

07-08-2006, 04:54 PM	#4
Jeffs65GMC 4 headlights > 2 Join Date: Jun 2006 Location: Greenville, NC Posts: 52	Re: Was 4WD an option in 1963 or 64? Can't speak from much experience, but on my fairly rust free 65, it had a bit of rust on the rear of the top of the cab (where it angles back out), one rocker, and one cab corner. Cab corners and rockers are gonna be an issue in any truck, along with door bottoms, fenders, etc. Anything can be fixed with some sheetmetal and a welder, so don't be scared away if it's mostly solid. __________________ 1965 GMC 1000 fleetside (for sale) 1989 Jeep Wrangler (currently torn down, will return again) 1998 Jeep Cherokee (daily driver)