The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

70GMCer · 07-16-2006, 07:22 AM

I did local searching at all the parts stores 1st, to see what they looked like in person. Most all the store wanted around $40.00 for the 3 gauge setup and $20.00 for the vacuum gauge. All the stores only had the white ones. I wanted the black. After looking on the web, I got these off Amazon.com and you even get free shipping and no tax added. They were $35.00 for the 3 and $15.00 for the vacuum. When I put them in the cart to buy, they offer you an Amazon Visa card, and if you except, they take $30.00 off the price for your 1st order using that card. They say the price will be shown on your bill, when it comes in. If that's the case, I'll have only paid $15.00 for the whole setup. I don't plan on using that high interest card though. I'll just cut it up.....

The part numbers are CP8218 & CP7955. I got them in 4 days. Only thing I don't care for, is the lighting. The light sockets are kinda lame and give out a yellowish light. I'm most likely going to replace them with white leds......Here's the web site and hope this helps anyone interested in these. They are a cheap alternative to the higher end gauges.

http://www.amazon.com/s/ref=br_ss_hs...s=sunpro+gauge

steve

07-16-2006, 07:22 AM	#8
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: This is what I did today I did local searching at all the parts stores 1st, to see what they looked like in person. Most all the store wanted around $40.00 for the 3 gauge setup and $20.00 for the vacuum gauge. All the stores only had the white ones. I wanted the black. After looking on the web, I got these off Amazon.com and you even get free shipping and no tax added. They were $35.00 for the 3 and $15.00 for the vacuum. When I put them in the cart to buy, they offer you an Amazon Visa card, and if you except, they take $30.00 off the price for your 1st order using that card. They say the price will be shown on your bill, when it comes in. If that's the case, I'll have only paid $15.00 for the whole setup. I don't plan on using that high interest card though. I'll just cut it up..... The part numbers are CP8218 & CP7955. I got them in 4 days. Only thing I don't care for, is the lighting. The light sockets are kinda lame and give out a yellowish light. I'm most likely going to replace them with white leds......Here's the web site and hope this helps anyone interested in these. They are a cheap alternative to the higher end gauges. http://www.amazon.com/s/ref=br_ss_hs...s=sunpro+gauge steve __________________ 1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 07-16-2006 at 07:28 AM.