The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

HeavyD · 07-20-2006, 06:01 PM

Yeah, the size will be stamped on there somewhere. Another way is to put the center cap on and see if the end of it sticks out past the rim or is recessed. The Vette's are 8 inches and the cap is sunk inward quite a bit. The 7 inchers (Camaro, Monte Carlo) make the center cap appear to stick out a little past the edge of the rim/trim ring. Hope this made some sense.

07-20-2006, 06:01 PM	#4
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: ralley id please Yeah, the size will be stamped on there somewhere. Another way is to put the center cap on and see if the end of it sticks out past the rim or is recessed. The Vette's are 8 inches and the cap is sunk inward quite a bit. The 7 inchers (Camaro, Monte Carlo) make the center cap appear to stick out a little past the edge of the rim/trim ring. Hope this made some sense. __________________ "You can take the man out of PA, but you can't take PA out of the man"