Quote:
|
Originally Posted by dwcsr
You may want to go with an air ride kit. Because you don't have much experince I would go with the Air ride technologies kit. They have very good support and you won't have to piece together a kit. I would also ask them about the drop for the rear. Some 2.5" drop spindle for the front.
Early classics also has some good kits. They also have a section which shows what the kit looks like on your truck when installed. http://www.earlyclassic.com/Tech.asp...=Stance+Photos
Some may reccomend ***************** for the parts but you would have to piece together and weldup a lot of parts to get it to work. I don't find them that much cheaper after shipping is added in.
what you want is not cheap. |
The only thing he'll have to weld in with the kit from S.D. is the lower cups to the a-arms. That's it. And they offer a build-your-own kit on the website and it is very easy to do. The only thing you'll have to figure out is what fittings you'll need. I spent roughly $900- including shipping. The only thing I had to get extra were my fittings. I bought good brass fittings (DOT rated) from a local supply house and all of them cost about $160.
If you're not concerned with going to the ground, add in a c-notch ($100), super track bar, shocks, shock relocators, and you're set. I think that's everything.