The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

nxtruck · 08-03-2006, 03:15 PM

I'd be glad to, if I can figure out how to do it. I've been meaning to post some pics of my truck on the picture forum, but haven't quite figured out how. Not too computer-literate!
Anyways, those brackets are really nothing more than 1/4" steel turned to make a 90* bend. All together, they're about 5" long, bent in a 90* at about 2 1/2". I drilled a hole in each flat, bolted the bracket to the frame, then attached the upper mount of the shock through the other hole. Nothing too fancy. If I can figure this picture thing out, I will get some pics up.
Hope this helps.

08-03-2006, 03:15 PM	#181
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Ran 11.44 @117.69mph I'd be glad to, if I can figure out how to do it. I've been meaning to post some pics of my truck on the picture forum, but haven't quite figured out how. Not too computer-literate! Anyways, those brackets are really nothing more than 1/4" steel turned to make a 90* bend. All together, they're about 5" long, bent in a 90* at about 2 1/2". I drilled a hole in each flat, bolted the bracket to the frame, then attached the upper mount of the shock through the other hole. Nothing too fancy. If I can figure this picture thing out, I will get some pics up. Hope this helps.