|
Re: Got Bags???
Quote:
|
Originally Posted by 67Fleet
??? How? My Slams don't have a center mounting hole in the top of the bag, so I wouldn't have anywhere to put the 3/8x4 bolt. They only have 2 holes about an inch off center if I remember correctly, plus the port.
|
You rotate the bag so the 'bolts' are centered in each half of the trailing arm. I drilled the mounting holes within a 1/4" of the center seam & drilled a hole for the air fitting/lines. My bolts also go through both the top & bottom of the trailing arm.
FWIW, some newer Firestones are set up for single bolt installations on top & bottom..... others could have a similar arrangement & I welded the seams of my trailing arms w/a 2" bead every 6" or so the length of the arms.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
Last edited by SCOTI; 08-04-2006 at 09:24 AM.
|