The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phantom dually · 08-06-2006, 12:51 PM

Kevin the exhaust decision is more of a last resort. The ladder bar suspension leaves very little room to put the exhaust over the rear axle. I had the exhaust previously dump right under the truck with a single 40 series and a turndown. That was VERY annoying. I hope to get the exhaust actually exit just under the bed before the tire on each side. With the BBC 496 I dont expect to do alot of talking!! The cam is pretty lopey so we will see. I have some progress pics i just need to resize them.

08-06-2006, 12:51 PM	#231
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Re: New Project truck!! Kevin the exhaust decision is more of a last resort. The ladder bar suspension leaves very little room to put the exhaust over the rear axle. I had the exhaust previously dump right under the truck with a single 40 series and a turndown. That was VERY annoying. I hope to get the exhaust actually exit just under the bed before the tire on each side. With the BBC 496 I dont expect to do alot of talking!! The cam is pretty lopey so we will see. I have some progress pics i just need to resize them. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 08-10-2006 at 08:06 PM.